Prepare the corn. Trim the silk from the top of each ear to prevent it from catching fire and burning. Peel away the first layer of husks and remove the stalk end using a serrated knife to expose the bottom of the ear. This will make it easier to slide the ear of the husk, post grilling. (Optional: Peel back a 1-inch section to expose the kernels and char some of the corn.)
Check the fuel lines for visible defects. If any fuel lines have unmistakable damage (like rips, holes, cracks), replace the parts immediately before your next use of the grill. Also be sure that any fuel lines have a smooth trail. You don’t want any of your fuel lines to be bent, because that will prevent the gas from flowing correctly. Check the exterior of the gas tank for any damage as well; things like dents, erosion, punctures, or any evident signs of damage. If you find areas that have obvious damage, you could potentially have a gas leak.
Chefs and the cooks who know their way around a kitchen (or a grill) know how meat feels when it's raw and when it's cooked. The only way to learn this is to basically poke the steaks at different stages of cooking. Raw meat is almost squishy, rare meat is quite soft, medium rare meat resists your poking a bit, and medium meat springs back. Once meat feels firm, it's at least well done, if not completely overdone. Gently press a finger onto your steaks—being careful not to burn yourself—to teach yourself the difference.
For metal and cast iron grill grates, coat lightly with a high temperature oil like Canola or Peanut oil – wipe off any excessive oil, install the grates and fire up the grill. Heat the grill on high and let it burn for ~30 mins. This will burn all the solvents and impurities off of the heating elements, grill grates, etc. Note that porcelain grates won’t need a coat of oil, but will benefit from the burn in process to remove any chemicals/impurities that were applied by the manufacturer.
Clean the exterior of the grill. Soapy water is the safest cleaning solution for most gas grills. Just make a cleaning solution with water and a squirt or two of mild dishwashing soap. Wipe the exterior of the grill with the soapy water, use a rag dipped in clean water to remove the soap residue, and then dry the exterior of the grill thoroughly.